Adorable Embroidery

Every now and then, I like to dabble in sewing crafts. It always reminds me of our sewing projects in elementary school where we learned basic sewing, cross stitching, and how to use the sewing machine.

But these days, I prefer small scale and low commitment projects so that I can finish in one sitting.

I found this book in the library. It's called "Stitch Love" created by Mollie Johanson. The cover definitely caught my attention -- adorable little creatures!

But flipping through the pages compelled me to borrow the book right away. It's a treasure-trove of ideas:

Sigh. Aren't they darling?

At the back pages are patterns that I traced on a sheet of paper.

 I transferred my chosen design to a piece of cloth.

The hot iron transfer pencil and an iron were very handy for this purpose.

I used a few sewing supplies like a needle, embroidery thread, scissors, and an embroidery hoop. 

Here's my stitched little bunny:

I outlined him with embroidery thread. To make the design my own, I filled in with colored pencil and sewed on a pompom tail...TADA!

I can hang this in my craft space or give it away. I think it will make a fun addition to a child's bedroom, don't you think?

And that's how I turned plain fabric from blah to TADA!

***An update as of August 28, 2020:

My embroidered blue bunny was among the embroidery hoop DIY projects featured on the Michaels Instagram Feed...TADA!

Crafty Tool Spotlight: A Funnel Tray

Crafting is my all time favorite hobby which is why I'm always on the lookout for tools that help me do things efficiently.

Here is one that blew my mind:

This is called a bead funnel tray.

It looks like a flask with a window.

It has a hole that can be opened or sealed with a screw-on cap.

For jewelry makers, simply put the beads on the tray to keep them from rolling off your table. Whether you use needle and thread, wire, elastic cord, leather or ribbon to assemble your jewelry, the tray neatly corrals your beads.  

Once done with this set of beads, unscrew the cap...

And transfer the beads to a storage container. The flask works as a funnel...TADA!

No mess, no stress! I love that! 

For paper crafters, use the tray for glitter, embossing powder, and small confetti. 

Once you're done, the left-over glitter easily falls back into its jar...TADA! No sweeping or dusting involved!

This nifty tool is not easily available in most craft stores. There are similar ones here and here. But why buy when we can D.I.Y.?

We can easily replicate a funnel tray using an empty lotion bottle. 

The best bottle to use is the one that's rectangular and can lie flat.

Rinse the inside with warm sudsy water, let it dry, and remove all the labels.

With a sharp pair of scissors, cut a window on one side of the bottle (you may need to make an initial cut with a blade especially if the plastic is thick...be very careful).

. 

Try to make neat cuts and trim off any not-so-smooth edges. 

Detach the part of the lotion pump that looks like a straw...we no longer need this.

Screw the cap back on the bottle.

Now we can use it as a funnel tray...TADA!

I like to use it for bigger beads...

Because they can easily fit through the hole and back into the container...TADA!

Isn't it wonderful that we get to do some recycling and also add a new tool to our craft arsenal? 

The Basics of Shrinky Dinks

Howdy friends! It's nice to see you today!

Have you tried or at least heard of Shrinky Dinks? They were popular in the 1980's but are still available today.  

The kit includes these acetate-type sheets. 

Draw or trace images directly on the sheets, cut them out, and bake them in a toaster for a few minutes.

The heat from the toaster shrinks them to 1/3 of their original size and makes them 9 times thicker like hardened plastic...TADA! 

I've been experimenting with Shrinky Dinks so let me share this tutorial and a few tips I've learned. 

The first step is to create your image by drawing or tracing. Use a permanent marker to define the drawing. Try to fit as many images on the sheet to avoid waste while being mindful to leave a small cutting margin. 

The next step is to cut around each image. I used a bigger pair of scissors to separate the drawings from the sheet and a smaller pair of scissors to get into the grooves of each drawing.

Keep the cuts smooth and sharp. 

Notice that I cut very close to the edges of the drawing.

Take the baking tray that came with your toaster oven and line it with a sheet of wax paper or parchment paper.

Lay the cutouts on the paper, making sure the inked side of the drawing is NOT touching the paper. It might be difficult to tell which is the inked side; just remember the orientation of how you drew your image (ex. wings on the left side of butterfly or smaller part of succulent plant on the right side of pot) and this side should be facing you, not the paper. Also, don't overcrowd the tray. You can bake a second and third batch later on.

The instructions on the package says to pre-heat the toaster to 325 degrees Fahrenheit (163 degrees Celsius). I wasn't sure how to do that on a toaster (compared to a regular oven that has a pre-heat setting) so I turned it on to the required temperature without putting anything inside the toaster. I set it to 5 minutes. When the timer rang, I put in the tray with the Shrinky Dinks and set the timer to 3 minutes (the baking time indicated in the instructions were 1-3 minutes). 

There was a small amount of smoke as the first batch was baking (yikes!). I lowered the temperature to 300 degrees Fahrenheit (148 degrees Celsius) in the following batches (no smoke...YAY!). 

Keep an eye on it and you'll see them shrink, as if watching a time lapse video. After the pieces lie flat, give it an additional 30 seconds before taking it out of the toaster.

Using a pair of oven mitts, take the tray out of the toaster and lay it on a trivet or cooling rack. Then press a sheet of paper or cardboard on top of the Shrinky Dinks and lightly press flat (I used a small book to weigh it down). Let this cool for about 15 to 20 seconds. 

See how they shrunk?

Let me show you some of the mistakes I made:

For this one, I put the ink-side down on the paper leaving some of the ink rubbing onto the wax paper. And there's some fuzziness and spots on the flower, too (blah).

Same for the butterfly (blah).  So remember to position the drawing inked-side up on the tray. 

The succulent drawing curled into itself (blah)! This can happen if you leave it in the toaster for too long and not weigh it down immediately. Or it could also be the drawing where one side is more tapered? I'm not sure.

Thankfully I positioned this flower correctly...TADA!

Take out your paint brush and acrylic paint and paint the back side of the Shrinky Dinks. I used three coats (hold it up to the light as you paint; there shouldn't be any clear areas).

Note: The instructions says that you can paint the Shrinky Dinks before baking them in the toaster. I tried that but the paint cracked and peeled off (blah). Not a good idea. Remember to paint after baking. 

Allow the paint to dry for at least 30 minutes.

Here's what the painted flowers look like...TADA!

And the butterflies...TADA!

And the birds, too!

Notice also the thickness of the plastic. 

To make it more functional, I'm adding a bar pin.  

This one's rescued from an old conference ID tag (blah to TADA!).

Attach the bar pin or pin with clutch back to the Shrinky Dinks with hot glue and allow this to dry for a few minutes.

Use these pins to liven up your wardrobe.

And turn your old closet staples from blah to TADA!

***An update as of August 27, 2020:

My Shrinky Dinks flower and butterfly pins were featured on the @AreteAteneo Instagram feed...TADA!